Menu
Fully automatic control system for animal & reptile basking zones with up to four BaskZone® 1.5kW shortwave infrared heaters. Heat output can be adjusted in fine increments to provide the optimal temperature. Daily on and off times are set using the CC3 7-day time programmer. A high limit safety cut-out will turn the heaters off if the ambient temperature inside the enclosure reaches a user-defined pre-set level.
Note: when the BaskZone® heat output is reduced, energy consumption is also lowered.
| Maximum load | 6kW |
| Power supply | 230 – 250Vac ~50-60Hz. |
| Ingress Protection | IPX5 (moisture & splashproof) |
| Dimensions | 275 x 80 x 200mm (wdh) |
| IP rating | IP65 |
| Mains cable | 4mm² |
| Power supply | 230 – 250Vac ~50-60Hz. |
| On periods | Up to 3 per day |
| Dimensions | 147 x 30 x 85mm (wdh) |
| IP rating | IP30 |
| Controller cable | 2 wire low voltage pair |
| Type | NTC Thermistor |
| Accuracy | ±0.2°C |
| Dimensions | 113 x 50 x 110mm (wdh) |
| IP rating | IP65 |
| Controller cable | 2 wire low voltage pair |
(Please note – this product is intended for professional installation)
Newsletter
Company
Contact
BaskZone® is a trading name of SunSwitch Limited. Registered company number no. 04206509. VAT no. GB582862310.
Registered office: International House Kingsfield Court, Chester Business Park, Chester, England, CH4 9RF.
